Work Procedure

• Close the door.
• Fully open the door window.
• Place a piece of wood near fully closed position.
• Close door glass completely with AUTO-UP.
• Check the following conditions
  • Check that glass lowers for approximately 150 mm (5.9 in) without pinching piece of wood and stops.
  • Check that glass does not rise not when operating the power window main switch while lowering.
    CAUTION:

    • Perform initial setting when AUTO-UP operation or anti-pinch function does not operate normally.
    • Check that AUTO-UP operates before inspection when system initialization is performed.
    • Do not check with hands and other body parts because they may be pinched. Do not get pinched.

END