April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

PERFORM ECM RECOMMUNICATING FUNCTION
1. Install ECM.
2. Contact backside of the registered Intelligent Key* to push-button ignition switch while brake pedal is depressed, then turn ignition switch ON.
  *: To perform this step, use the key that is used before performing ECM replacement.
3. Maintain ignition switch in the ON position for at least 5 seconds.
4. Turn ignition switch OFF.
5. Check that the engine starts.
GO TO STEP 2 .

PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM

Refer to DESCRIPTION (VR30DDTT engine models) or DESCRIPTION (2.0L turbo gasoline engine models).

END