April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure: ECM

PERFORM CONFIGURATION

With CONSULT
1. Turn Ignition Switch ON.
2. Select the "Re/programming, Configuration" of CONSULT.
3. Perform configuration according to the CONSULT display.
4. Select the "Manual Configuration". (If necessary)
5. Perform configuration according to the CONSULT display.
GO TO STEP 2 .

CHECK DTC

With CONSULT
1. Turn Ignition Switch OFF and wait for 10 seconds or more.
2. Turn Ignition Switch ON.
3. Perform self-diagnosis.
4. Check that no DTC is detected.
WORK END