LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2017 >> QX80 Limited >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window Control System >> Circuit Diagnosis >> Encoder >> Driver Side >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

  1. CHECK ENCODER SIGNAL

    1. Turn ignition switch ON.
    2. Check signal between power window main switch harness connector and ground with oscilloscope.
      Signal name (+) (-) Signal
      (Reference value)
      Power window main switch
      Connector Terminal
      Encoder signal 1 D5 11 Ground Refer to following signal
      Encoder signal 2 12
      G06934392Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal?

    YES 

    Replace power window main switch. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 2  .

  2. CHECK ENCODER SIGNAL CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect power window main switch connector and front power window motor (driver side) connector.
    3. Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.
      Power window main switch Front power window motor
      (driver side)      		 Continuity
      Connector Terminal Connector Terminal
      D5 11 D7 5 Existed
      12 6
    4. Check continuity between power window main switch harness connector and ground.
      Power window main switch Ground Continuity
      Connector Terminal
      D5 11 Not existed
      12

    Is the inspection result normal?

    YES 

    GO TO STEP 3  .

    NO 

    Repair or replace harness.

  3. CHECK ENCODER POWER SUPPLY

    1. Connect power window main switch connector.
    2. Turn ignition switch ON.
    3. Check voltage between front power window motor (driver side) harness connector and ground.
      (+) (-) Voltage (V)
      (Approx.)
      Front power window motor (driver side)
      Connector Terminal
      D7 2 Ground 12

    Is the inspection result normal?

    YES 

    GO TO STEP 5  .

    NO 

    GO TO STEP 4  .

  4. CHECK ENCODER POWER SUPPLY CIRCUIT

    1. Turn ignition switch OFF.
    2. Disconnect power window main switch connector.
    3. Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.
      Power window main switch Front power window motor (driver side) Continuity
      Connector Terminal Connector Terminal
      D5 3 D7 2 Existed
    4. Check continuity between power window main switch harness connector and ground.
      Power window main switch Ground Continuity
      Connector Terminal
      D5 3 Not existed

    Is the inspection result normal?

    YES 

    Replace power window main switch. Refer to REMOVAL AND INSTALLATION .

    NO 

    Repair or replace harness.

  5. CHECK GROUND CIRCUIT 1

    1. Turn ignition switch OFF.
    2. Disconnect power window main switch connector.
    3. Check continuity between power window main switch harness connector and front power window motor (driver side) harness connector.
      Power window main switch Front power window motor (driver side) Continuity
      Connector Terminal Connector Terminal
      D5 10 D7 4 Existed

    Is the inspection result normal?

    YES 

    GO TO STEP 6  .

    NO 

    Repair or replace harness.

  6. CHECK GROUND CIRCUIT 2

    1. Connect power window main switch connector.
    2. Check continuity between power window main switch connector and ground.
      Power window main switch Ground Continuity
      Connector Terminal
      D5 10 Existed

    Is the inspection result normal?

    YES 

    Replace front power window motor (driver side). Refer to REMOVAL AND INSTALLATION .

    NO 

    Replace power window main switch. Refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals