Configuration (Electronic Stability Program Control Unit): Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the electronic stability program control unit.
The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the electronic stability program control unit.
Refer to Work Procedure .
NOTE:
For details the network connection and operation, refer to "CONSULT Operation Manual".
The configuration no need to "save" configuration data from the electronic stability program control unit. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.
CAUTION:
Follow the instructions listed below.
- Complete the procedure of "Read / Write Configuration" in order.
- If incorrect "Read / Write Configuration", incidents might occur.
- Never perform "Read / Write Configuration" except for new electronic stability program control unit.