Configuration (BCM): Description

Vehicle specification needs to be written with CONSULT because it is not written after replacing the BCM.

The configuration requires network connection. CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the BCM.

Refer to Work Procedure .

NOTE: For details the network connection and operation, refer to "CONSULT Operation Information".

The configuration no need to "save" configuration data from the BCM. The configuration data is always generated freshly at the server and then downloaded to the CONSULT.

CAUTION:

Complete the procedure of "Read / Write Configuration" in order.
If incorrect "Read / Write Configuration", incidents might occur.
Never perform "Read / Write Configuration" except for new BCM.