Work Procedure

With CONSULT

1. Turn ignition switch ON.
2. On the CONSULT screen, select "ENGINE">>"WORK SUPPORT">>"CAMSHAFT REFERENCE ADAPTATION".
3. Touch "Start".

GO TO 2.

With CONSULT

1. Start the engine and let it idle.
2. Check the following conditions.

   BATTERY VOLTAGE	> 10 V
   ENGINE SPEED	> 2, 520 1/min
   COOLANT TEMP (RAW VALUE)	80 deg.C (176 deg.F) ≤ temperature ≥ 90 deg.C (194 deg.F)
   ENG OIL TEMP	≤ 110 deg.C (230 deg.F)

Is the condition satisfied?

YES

GO TO 3.

NO

Satisfy the condition, and GO TO 3.

With CONSULT

1. Touch "Start" and wait a few seconds.
2. Touch "Continue" and wait a few seconds.

Is "COMPLETED" displayed on CONSULT screen?

YES

END

NO

Follow the instruction of CONSULT display.