LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX30 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (Introduction And Basic Inspection) >> Basic Inspection >> Enabling Of Engine Start After Crash Event >> Work Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

  1. START 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
    2. On the CONSULT screen, select "ENGINE" >> "WORK SUPPORT" >> "Enabling of engine start after crash event".
    3. Touch "START and wait a few seconds.
    4. Make sure that "CMPLT" is displayed on CONSULT screen.

    GO TO 2.

  2. CHECK DTC 

    SYMBOL With CONSULT

    1. Turn ignition switch OFF and wait at least 30 seconds.
    2. Turn ignition switch ON.
    3. Check DTC. If DTC is displayed, erase it.

    END

scientia non olet · About LEMON Manuals