Work Procedure

With CONSULT

1. Turn ignition switch ON.
2. On the consult screen, select "ENGINE">>"WORK SUPPORT">>"TEACH IN OF CAMSHAFT POSITION".
3. Touch "Start".

GO TO 2.

With CONSULT

1. Start the engine and let it idle.
2. Check the following conditions.

   ENGINE SPEED	500 1/min ≤ engine speed ≥ 1, 000 1/min
   COOLANT TEMPERATURE	60 deg.C (140 deg.F) ≤ temperature ≥ 90 deg.C (194 deg.F)

Is the condition satisfied?

YES

GO TO 3.

NO

Satisfy the condition, and GO TO 3.

With CONSULT

1. Touch "Start" and wait a few seconds.
2. Touch "Continue" and wait a few seconds.

Is "COMPLETED" displayed on CONSULT screen?

YES

END

NO

Follow the instruction of consult display.