Work Procedure

With CONSULT

1. Turn ignition switch ON.
2. On the CONSULT screen, select "ENGINE">>"DATA MONITOR">>"SEN ROTOR ADAPT CMPLT".
3. Start the engine.
4. Push stop/start OFF switch to deactivate stop/start system.
5. Shift selector lever to manual mode (1st gear).

GO TO 2.

With CONSULT

1. Accelerate to 20 km/h (13 MPH), and then release the accelerator pedal to decelerate for 4 seconds or more (in the fuel cut status).
   CAUTION: Never rev up the engine speed to 4, 000 rpm or more.
2. Check "SEN ROTOR ADAPT CMPLT" display.

Is "YES" displayed on CONSULT screen?

YES

END

NO

GO TO 1.