LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2018 >> QX60 AWD >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belts Control System >> Precautions >> Precaution For Seat Belt Service >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Precaution For Seat Belt Service: Notes

CAUTION:
  • Before removing the Seat Belt Pre-Tensioner Assembly, turn the ignition switch OFF, disconnect both battery terminals and wait at least three minutes. For approximately three minutes after the battery terminals have been removed, it is still possible for the Air Bag and Seat Belt Pre-Tensioner to deploy. Therefore, do not attempt work on any SRS connectors or wires until at least three minutes have passed.
  • After replacing or reinstalling Seat Belt Pre-Tensioner Assembly, or reconnecting Seat Belt Pre-Tensioner Assembly connector, make sure entire SRS operates properly. Refer to SRS Operation Check .
  • Do not disassemble buckle or seat belt assembly.
  • Replace anchor bolts if they are deformed or worn out.
  • Do not oil tongue and buckle.
  • If any component of seat belt assembly is questionable, do not repair. Replace the whole seat belt assembly.
  • If webbing is cut, frayed, or damaged, replace seat belt assembly.
  • When replacing seat belt assembly, use a genuine INFINITI seat belt assembly.
scientia non olet · About LEMON Manuals