Work Procedure

With CONSULT

1. Turn ignition switch ON.
2. On the CONSULT screen, select "ENGINE" >> "WORK SUPPORT" >> "CAMSHAFT REFERENCE ADAPTATION".
3. Touch "Start".

GO TO 2.

With CONSULT

1. Start the engine and let it idle.
2. Check the following conditions.

   BATTERY VOLTAGE	> 10 V
   ENGINE SPEED	> 2, 520 1/min
   COOLANT TEMP (RAW VALUE)	80 deg.C (176 deg.F) temperature 90 deg.C (194 deg.F)
   ENG OIL TEMP	110 deg.C (230 deg.F)

Is the condition satisfied?

YES

GO TO 3.

NO

Satisfy the condition, and GO TO 3.

With CONSULT

1. Touch "Start" and wait a few seconds.
2. Touch "Continue" and wait a few seconds.

Is "COMPLETED" displayed on CONSULT screen?

YES

END

NO

Follow the instruction of CONSULT display.