Precautions When Using Power Tools (Air Or Electric) And Hammers
WARNING:
Always observe the following items for preventing accidental activation:
- When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the ignition/power switch ON or engine running, never use air or electric power tools or strike near the sensor(s) with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury.
- When using air or electric power tools or hammers, always switch the ignition/power switch OFF, disconnect the 12 V battery or batteries, and wait at least 3 minutes before performing any service.