Detailed Flow
- GET INFORMATION FOR SYMPTOM
Obtain information about the malfunction from the customer and check if it corresponds to NORMAL OPERATING CONDITION.
Does it correspond to NORMAL OPERATING CONDITION?
YES
Explain to the customer that it is not a malfunction.
NO
GO TO 2.
- PERFORM SELF-DIAGNOSIS
CONSULT
Perform self-diagnosis for "CHASSIS CONTROL".
Is DTC detected?
YES
Record or print self-diagnosis results and freeze frame data (FFD). GO TO 4.
NO
GO TO 3.
- PERFORM TROUBLE DIAGNOSIS BY SYMPTOM
Perform trouble diagnosis by symptom and repair/replace malfunctioning parts.
GO TO 5.
- PERFORM DTC/CIRCUIT DIAGNOSIS
Perform DTC/CIRCUIT DIAGNOSIS and repair/replace malfunctioning parts.
GO TO 5.
- FINAL CHECK
Recheck the symptom and check that symptom is not reproduced on the same conditions.
Is the symptom reproduced?
YES
GO TO 2.
NO
INSPECTION END