Work Procedure

1. • Fully open the door window.
   • Place a piece of wood near fully closed position.
   • Close door glass completely with AUTO-UP.
   • Check the following conditions:
     • Check that glass lowers for approximately 5.9 in (150 mm) without pinching piece of wood and stops.
     • Check that glass does not rise when operating the main power window and door lock/unlock switch while lowering.
       CAUTION:

       • Perform initial setting when AUTO-UP operation or anti-pinch function does not operate normally.
       • Check that AUTO-UP operates before inspection when system initialization is performed.
       • Do not check with hands and other body parts because they may be pinched. Do not get pinched.

>>

Inspection End.