| A function interlocked with the key does not work according to driver's settings. |
Driver's settings is changed by other users. |
Reconfigure and check operation. |
| The key link function does not work. |
The key link function is deactivated. |
Activate the key link function. |
| Not changed to a set position of automatic drive positioner. |
If a seat position is changed manually before starting the AV system, then automatic adjustment to a set value is not performed. |
This is not a malfunction. |
| The key link function is deactivated. |
Activate the key link function. |
| Air conditioner does not work according to driver's settings. |
- When ambient temperature is 0°C (32°F) or less, A/C switch is not operational because of preventing the windows from fogging up.
- When the defroster switch is ON, the mode cannot be switched to DUAL mode.
|
This is not a malfunction. |
| The welcome screen is not displayed. |
The key link function is deactivated. |
Activate the key link function. |
| The showing of the welcome screen is disabled. |
Enable the showing of the welcome screen. |
| A user other than the driver is shown on the welcome screen. |
- The door is unlocked by without using driver's key.
- Two or more keys are in the vehicle.
|
If two or more keys are in the vehicle, the system may be misidentified. Select user from User list or turn OFF the key switch to unlock the door with driver-owned key. |
| User icons of other users are not displayed on the welcome screen. |
No users except for guest are registered. |
Perform user registration. |
| "You can store setting values for each user with a connected key" is shown on the display screen. |
For a key newly identified by the system, a message of user setting is displayed. |
If the user has a history of user registration with a different key, press the "Select User" button. For new registration, press the "Add User" button to perform the user registration. |
| User registration cannot be performed on the welcome screen. |
This is not a malfunction. The user selection screen is displayed for approximately 5 seconds after the end of AV system startup. |
After starting the integral switch (lower display), select user by pressing the user icon or User Edit. |
| "I-Key is turned off. To turn it on, turn on the I-Key link in the settings" is shown on the display screen. |
The key link function is deactivated. |
Activate the key link function. |
| Infiniti Drive Mode Selector does not work according to driver's settings. |
When the key switch is turned ON from the OFF condition, the STANDARD mode starts according to the specification. |
Switch the mode to the PERSONAL mode interlocked with the log-in function. |