Removal and Installation
CAUTION:
- Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING". Refer to Description .
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING". Refer to Description .
REMOVAL
- Remove battery tray. Refer to Removal and Installation .
- Disconnect the harness connectors from the ECM, TCM, electric intake valve timing control module, and VCR control module. Refer to Harness Connector (lever locking type).
- Remove module assembly bracket bolts.
- Remove electric intake valve timing control module nuts.
- Remove electric intake valve timing control module.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- Perform "ACCELERATOR PEDAL RELEASED POSITION LEARNING". Refer to Description .
- Perform "THROTTLE VALVE CLOSED POSITION LEARNING". Refer to Description .