I-TEC Control System
- Description
- Operation
- Diagnosis & Testing
- Notes
- Entering Diagnostic Mode
- Clearing Trouble Codes
- Diagnostic Tools
- Circuit Inspection
- Test 1: Power Supply Check
- Test 2: O2 Sensor (Codes 13, 44 And 45)
- Test 3: Water Temp Sensor (Codes 14, 15 & 16)
- Test 4: TPS (Codes 21, 43 & 65)
- Test 5: Starter Signal (Code 22)
- Test 6: Crank Angle Sensor (Code 41)
- Test 7: Air Flow Sensor (Codes 61 And 62)
- Test 8: Vehicle Speed Sensor (Code 63)
- Test 9: Detonation Sensor (Code 66)
- Test 10: MCU (Codes 51, 52 & 55)
- Test 11: Power Transistor System (Codes 23, 35 & 54)
- Test 12: Vacuum Switching Valve (Code 25 & 53)
- Test 13: Fuel Injector Circuits (Code 33)
- Test 14: Injector Transistor Ground Circuit (Code 64)