I-TEC Control System
- Description
- Operation
- Testing
- Notes
- Diagnostic Procedure
- Diagnostic Tools
- Circuit Inspection
- Test 1 - Power Supply Check
- Test 2 - Oxygen Sensor (Codes 13, 44 And 45)
- Test 3 - Coolant Temperature Sensor (Codes 14, 15 And 16)
- Test 4 - Throttle Position Switch (Codes 21, 43 And 65)
- Test 5 - Starter Signal (Code 22)
- Test 6 - Crank Angle Sensor (Code 41)
- Test 7 - Air Flow Sensor (Codes 61 And 62)
- Test 8 - Vehicle Speed Sensor (Code 63)
- Test 9 - Detonation Sensor (Code 66)
- Test 10 - MCU (Codes 51, 52 And 55)
- Test 11 - Power Transistor System (Codes 23, 35 And 54)
- Test 12 - Vacuum Switching Valve (Code 25 And 53)
- Test 13 - Fuel Injector Circuits (Code 33)
- Test 14 - Injector Transistor Ground Circuit (Code 64)