LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1984 >> Impulse Automatic >> Repair and Diagnosis >> Engine Performance >> System >> I-TEC Control System >> Testing >> Test 5 - Starter Signal (Code 22)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test 5 - Starter Signal (Code 22)

Disconnect MCU control terminals at MCU. Connect voltmeter positive lead to terminal 25 and negative lead to ground. Check for starter signal when ignition switch is turned to start position. If no signal, check circuits to ignition switch and MCU.

scientia non olet · About LEMON Manuals