Diagnostic System
The ECU is equipped with a self-diagnostic system which detects system failures or abnormalities. When a malfunction occurs, the ECU will store a code in its memory. ECU will also turn on a "CHECK ENGINE" lamp located on the instrument panel.
As a bulb and system check, the "CHECK ENGINE" lamp will glow when ignition switch is on and engine is not running. When engine is started, the lamp should go out after 4 seconds. If not, a malfunction has been detected in the I-TEC system.
NOTE:
The ECU self-diagnosis system is capable of troubleshooting the electrical circuits in the I-TEC system only. The ECU can not detect problems in the data sensors, secondary ignition, fuel injection system or engine mechanical conditions.