| 1.6L Eng,FWD | | 7.1 | | C |
| Combination Procedure: CLUTCH FORK SHAFT &/OR BUSHINGS: Removal & Installation: |
| | 0.3 | | B |
| Combination Procedure: CLUTCH PILOT BEARING: Remove & Replace: |
| | 0.7 | | C |
| Combination Procedure: CLUTCH PRESSURE PLATE: Remove & Replace: |
| | 0.6 | | C |
| Combination Procedure: CLUTCH RELEASE BEARING: Remove & Replace: |
| | 0.2 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.9 | | C |
| Combination Procedure: INPUT SHAFT: Remove & Replace: |
| | 1.6 | | A |
| Combination Procedure: INPUT SHAFT SEAL: Remove & Replace: |
| | 1.5 | | B |
| Combination Procedure: TRANSAXLE ASSEMBLY: Replace: |
| | 0.4 | | C |