Riding Height Adjustment

NOTE: Prior to performing riding height adjustments, perform preliminary visual and mechanical inspection of wheels, tires and suspension components. See PRE-ALIGNMENT INSTRUCTIONS in WHEEL ALIGNMENT THEORY/OPERATION article in GENERAL INFORMATION.

NOTE: Rear riding height specifications for Rodeo is not available at time of publication.

To measure front riding height, jounce vehicle several times and allow suspension to settle. Obtain dimension "Z" by subtracting dimension "B" from dimension "A". See Fig 1 . Dimension "Z" is true front riding height.
Ensure front and rear riding height is within specifications. See RIDING HEIGHT SPECIFICATIONS table. If front riding height is not within specifications, adjust height control arms by turning adjusting bolts. Rear riding height is not adjustable.

RIDING HEIGHT SPECIFICATIONS

Application

Front "Z" In. (mm)

In. (mm) Rear "D"

1995

4.961 (126)

⁽¹⁾

1996

5.079-5.472 (129-139)

⁽¹⁾

⁽¹⁾	Information is not available at time of publication.

Fig 1: Measuring Front Riding Height

Courtesy of ISUZU MOTOR CO.

Fig 2: Measuring Rear Riding Height

Courtesy of ISUZU MOTOR CO.