LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1995 >> Trooper LS, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Fuel System >> Fuel Pressure & Fuel Pump Relay Test >> Fuel Pressure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure

  1. Relieve fuel pressure. See FUEL SYSTEM PRESSURE RELEASE  . Attach Fuel Pressure Gauge Set (J-34730-1) and Adapter (J-35957-1) to Schrader fitting on fuel rail. Disconnect pressure regulator vacuum hose. Turn ignition on. Allow fuel pump to run for about 2 seconds.
  2. Fuel system pressure should be about 41-46 psi (2.8-3.2 kg/cm2 ). See FUEL PUMP PERFORMANCE  table. Start engine and check for leaks. Connect pressure regulator vacuum hose. If engine will not start, fuel pump relay can be by-passed. Also refer to the appropriate CHART A-3 - ENGINE CRANKS BUT WILL NOT RUN  under TROUBLE SHOOTING CHARTS. With engine idling, fuel pressure should be 25-30 psi (1.8-2.1 kg/cm2 ).
NOTE: To test the fuel pump relay circuit, proceed to CHART A-5 - FUEL PUMP RELAY CIRCUIT  under TROUBLE SHOOTING CHARTS.
scientia non olet · About LEMON Manuals