Engine Controls - Remove/Install/Overhaul: Introduction

NOTE: Before disconnecting battery or removing radio fuse, obtain anti-theft code for radio. After battery is reconnected, CODE will appear on radio display. Enter 5-digit code to restore radio operation. If code is entered wrong 3 times, leave radio on at least one hour, then enter code correctly. Any time radio power is lost, pre-selected radio stations will have to be set. For more information, see owners manual.

Removal, overhaul and installation procedures (when available) are covered in this article. If component removal and installation is primarily an unbolt and bolt-on procedure, only a torque specification may be furnished.