Idle Speed
- Idle speed is controlled by Idle Air Control (IAC) valve and is not adjustable. Throttle stop screw is preset at factory and sealed in position. See appropriate IDLE SPEED SPECIFICATIONS
. When installing a new Idle Air Control (IAC) valve, turn ignition switch off and replace original with identical part.
- Measure distance between tip of IAC valve pintle and valve mounting surface. If distance is greater than 1.1" (28 mm), use finger pressure to slowly retract pintle.
IDLE SPEED SPECIFICATIONS
| Application |
RPM |
| Trooper/SLX |
750 |