LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1997 >> Trooper LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Ground Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ground Circuits

  1. Disconnect PCM connectors. Using an ohmmeter, check for continuity to ground on PCM harness ground terminals. See PCM GROUND CIRCUIT TERMINALS table. Resistance should be zero ohms. If not, locate and repair open in wire.
  2. Reconnect PCM connectors. Using a voltmeter, connect negative lead of voltmeter to a good ground. Backprobe positive lead of voltmeter to each ground terminal. With vehicle running, voltmeter should indicate less than one volt. If voltmeter reading is greater than one volt, check for open, short, corrosion or loose connection on ground circuit. Repair as necessary.
PCM GROUND CIRCUIT TERMINALS

Vehicle PCM Connector Terminal No.
Trooper/SLX WHITE C7
Trooper/SLX WHITE C8
Trooper/SLX WHITE C9
scientia non olet · About LEMON Manuals