LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1997 >> Trooper LS >> Repair and Diagnosis >> General Information >> Traction Control Disable Procedures >> Traction Control Disable
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Traction Control Disable

WARNING: Placing a non-compatible vehicle on a single-axle dynamometer could result in a safety hazard to technicians and damage to vehicle. Vehicles which use All-Wheel Drive (AWD) or traction control may not be clearly marked. Use common sense and take all necessary precautions when placing any vehicle on the dynamometer. Determine between full-time 4WD and All-Wheel Drive (AWD) for testing purposes. The following tables include information related to full-time 4WD and AWD vehicles, and how to disable the traction control system (if disengageable).
WARNING: DO NOT operate vehicle on a 2-wheel dynamometer if the DO NOT TEST column is marked.
ISUZU

Application FWD RWD Part Time 4WD Full Time 4WD AWD TCS Do Not Test
Ascender
2003-08 (2WD) ... X ... ... ... X (1) ...
2003-08 (4WD) ... ... X (2) ... ... X (1) ...
Amigo
1989-94 (4WD) ... ... X (2) ... ... ... ...
1998-00 (4WD) ... ... X (3) ... ... ... ...
Axiom
2002-04 (4WD) ... ... X (4) ... ... ... ...
Hombre
1996-00 (4WD) ... ... X (2) ... ... ... ...
1996-00 (4WD) ... ... X (5) ... ... ... ...
i-280, i-350 & i-370 Pickup
2006-08 (2WD) ... X ... ... ... X (6) ...
2006-08 (4WD) ... ... X (5) ... ... ... ...
Impulse
1990-92 (4WD) ... ... ... X (7) ... ... X
Pickup
1981-95 (4WD) ... ... X (2) ... ... ... ...
Rodeo
1991-97 (4WD) ... ... X (2) ... ... ... ...
1998-04 (4WD) ... ... X (3) ... ... ... ...
Rodeo Sport
2001-03 (4WD) ... ... X (2) ... ... ... ...
Trooper
1984-97 ... ... X (2) ... ... ... ...
1998-02 ... ... X (8) ... ... ... ...
VehiCROSS
1999-00 ... ... X (8) ... ... ... ...
(1) Press switch with OFF/ON and swerving car icon, located near shift lever. Warning light will illuminate when system is disabled.
(2) Shift transfer case lever to 2H/2HI position.
(3) Ensure transfer case lever is in HIGH position. Ensure 4WD indicator light is not illuminated. To turn off 4WD, press 4WD button located on left side of dash.
(4) Press 2WD switch located on left side of dash. Rear wheels only. Indicator light symbol should illuminate.
(5) Press 2HI button on instrument panel.
(6) Press TRAC switch on instrument panel. TRAC OFF light will illuminate when system is disabled.
(7) Cannot be shifted to 2WD.
(8) Ensure transfer case lever is in HIGH position. Turn system off by pressing 4WD AUTO switch located on center of dash. Indicator light on instrument panel will show rear wheels illuminated.