Switch Input Tests

NOTE: Some wires have been assigned a superscript to distinguish them from other wires of the same color. For example, Yellow/Green(1) wire is not the same as Yellow/Green (2) wire.

Turn ignition off. Remove driver's door panel. Unplug connectors from master switch. Using a DVOM, perform appropriate switch input tests. See. Fig 1 -Fig 4 . If all input test results are okay, inspect connector and terminals for damage and proper fit. If connector is okay and power windows still malfunction, replace master switch.

Fig 1: Switch Input Test (Civic Coupe/Hatchback)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Switch Input Test (Civic - Sedan)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 3: Switch Input Test (CR-V)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 4: Switch Input Test (Odyssey & Oasis)

Courtesy of AMERICAN HONDA MOTOR CO., INC.