LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 1998 >> Oasis LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Computerized Engine Controls >> Powertrain Control Module >> Ground Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ground Circuits

  1. Measure resistance to ground at appropriate PCM ground terminals. See POWER & GROUND CIRCUIT TERMINAL IDENTIFICATION  . See Figure . Resistance should be zero ohms for each circuit. If resistance is not zero ohms, repair open to ground.
  2. To check voltage drop on ground circuit, connect negative lead of DVOM to a good ground. Connect positive lead to each ground terminal. With engine running, voltmeter should indicate less than 0.1 volt. If voltage is more than 0.1 volt, check for open, corrosion, or loose connection on ground lead. See WIRING DIAGRAMS article.
scientia non olet · About LEMON Manuals