Removal Procedure

1. Disconnect the negative battery cable.
2. Block the wheels.
3. Remove the two screws attaching the rear console and lift the upward rear console, then disconnect the switch connector.
4. Remove the lower cluster assembly by pulling the cover toward the rear.
5. Remove the transfer knob.
6. Remove the six screws attaching the upper console and front console.
7. Disconnect the red, white, and blue electrical connectors at the PCM.
8. Remove the two screws in the front of the PCM.
9. Remove the one screws at the left rear of the PCM.
10. Pull the PCM straight out from the dashboard.