Driver's Window Operates In One Direction Only: Hombre
- Remove driver's door lock and side window switch and disconnect electrical connectors. Use test light and backprobe between ground and driver's door lock and side window switch connector C2 terminal "A" (Dark Blue wire). See WIRING DIAGRAMS . If test light comes on, go to next step. If test light does not come on, go to step 3).
- Repair short to ground in Dark Blue or Brown wire between switch and regulator motor. See WIRING DIAGRAMS . After repairs, recheck system operation.
- Replace driver's door lock and side window switch. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. After replacement, recheck system operation.