Tooth Error Correction Learn Procedure
- Ensure all fluid levels are normal, engine is at operation temperature, and no camshaft or crankshaft DTCs are present before performing this procedure. Place vehicle in PARK or Neutral. Block drive wheels. Turn off all accessories
- Using scan tool, enable Tooth Error Correction procedure. This will limit RPM. Depress and hold brake pedal. Depress and hold throttle fully (100 percent) until correction is learned or number of attempts to learn are exceeded. Release throttle as soon as engine speed decreases. After throttle is released, RPM will no longer be limited. Do not depress throttle fully after releasing.