LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2000 >> Rodeo S 2WD L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Testing and Inspection >> Component Tests and General Diagnostics >> Functional Check
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Functional Check

1. Perform the On-Board Diagnostic System Check.
2. Start the engine and run for least one minute.
3. Check for DTCs using Tech 2.

4. If the PCM fails to program, proceed as follows:
- Ensure that all PCM connections are OK.
- Check the ITCS for latest version software.
- Attempt to program PCM again. If PCM still cannot be programmed properly, replace PCM. The replacement PCM must be programmed.
scientia non olet · About LEMON Manuals