LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2002 >> Axiom Base, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Oil Pump >> Disassembled View >> Reassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disassembled View: Reassembly

  1. Lubricate and pre-install pressure regulator spring seat (27) on valve (28), with the flat side against shoulder.
  2. Install pressure regulator valve (28) and spring seat (27) assembly, valve spring (26), and spring seat (25) with the flat side away from spring to oil pump assembly (29).
  3. Assemble boost valve (24) into sleeve (23).
  4. Install boost valve and sleeve assembly, and sleeve pin (22) to oil pump assembly (29).
  5. Install throttle signal accumulator piston (21), spring (20), and spring seat (19), with the flat side away from the spring, and snap ring (18) to oil pump assembly (29).
  6. Install enable valve (17), spring guide (15), enable valve spring (16) and retainer pin (14) to oil pump assembly (29).
  7. Assemble torque converter regulator spring (10) and torque converter regulator valve (11) into sleeve (9).
  8. Install isolator valve (13), isolator valve spring (12) and the torque converter regulator sleeve and valve assembly into the oil pump assembly (29).
  9. Install torque converter clutch control valve spring (7), torque converter clutch control valve (6), plug (4) and seal ring (5), and retainer pin (3) to oil pump assembly (29).
  10. Install oil pump driven gear (2) and drive gear (1).
scientia non olet · About LEMON Manuals