LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2002 >> Rodeo LS, 2.2 D >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 2.2L >> Self-Diagnostic System >> Miscellaneous Tests >> Idle Air Control System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Idle Air Control System

Idle Air Control (IAC) system is conducted to test IAC for proper operation.

  1. Connect TECH 2 or equivalent scan tool to Data Link Connector (DLC). DLC is located at lower left side of instrument panel, behind a small cover. Start engine, allow to idle, and go to next step.
  2. On scan tool select F3: MISCELLANEOUS TESTS. From application menu select F3: IAC SYSTEM, and go to next step.
  3. Following scan tool instructions perform IAC system test. Observing IAC data lists, press INCREASE or DECREASE soft key. Idle speed should follow commands.
  4. If data list changes with commands. IAC has been reset and testing is complete. If IAC does not perform as specified, repair IAC motor as necessary. See IDLE AIR CONTROL MOTOR in SYSTEM & COMPONENT TESTING article.

scientia non olet · About LEMON Manuals