Tech 2 OBD II Connection: Solenoid

Solenoid 1-2/3-4, Solenoid 2-3, TCC Solenoid 

You can operate the solenoids by pressing the ON and OFF buttons.

Preconditions:  P-N position, no vehicle speed, no engine speed

Band Apply Solenoid 

You can operate the solenoid by pressing the ON and OFF buttons.

Preconditions:  P-N position, idle engine speed, no vehicle speed.

Pressure Control Solenoid (PCS) 

You can set desired PCS Current using the "Increment" (+25) and "Decrement" (-25) button. The PC Solenoid Data informs about PCS Current, Pressure and Duty Cycle.

Preconditions: P-N position, no engine speed, no vehicle speed