Conditions For Setting DTC
- No Throttle Position (TP) sensor, Vehicle Speed Sensor (VSS), Engine Coolant Temperature (ECT) sensor, Mass Air Flow (MAF) sensor, low system voltage, fuel system, EVAP canister purge, fuel injector control or ignition control DTC are stored.
- Barometric pressure is 75 kPa or more.
- EVAP canister purge duty cycle is 10 percent or more.
- Engine running time is 125 seconds or more.
- Vehicle speed is less than 1 mph.
- Engine coolant temperature is 122°F (50°C) or more.
- Ignition voltage is 9.5-16.7 volts.
- Idle engine speed is more than 200 RPM.
- All conditions are met for 10 seconds or more.