LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2003 >> Axiom Base, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Transmission Oil Temperature Sensor (Main Case) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmission Oil Temperature Sensor (Main Case): Installation

  1. Install wiring harness assembly with transmission oil temperature sensor to band apply solenoid, shift solenoids, and 7 way connector of main case.
  2. Install oil pan gasket, oil pan, and sixteen 10 mm fixing screws. Tighten the screws to the specified torque.

    Torque:  11 N.m (96 lb in)

  3. Fill transmission through the overfill screw hole of oil pan, using ATF DEXRON®-III. Refer to CHANGING TRANSMISSION FLUID .
  4. Connect battery ground cable.
scientia non olet · About LEMON Manuals