LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2003 >> Axiom Base, RWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Valve Body Assembly (Adapter Case) >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Valve Body Assembly (Adapter Case): Installation

  1. Inspect electrical 4 way connector and seal of adapter case. Replace if necessary.
  2. Install gasket, transfer plate, and gasket.
  3. Install adapter case valve body and seven 13 mm screws. Tighten the screws to the specified torque.

    Torque:  20 N.m (15 lb ft)

  4. Connect wiring harness assembly to converter clutch solenoid and force motor.
  5. Install oil pan gasket, oil pan, and twelve 10 mm screws. Tighten the screws to the specified torque.

    Torque:  11 N.m (96 lb in)

  6. Fill transmission through the overfill screw hole of oil pan, using ATF DEXRON®-III. Refer to CHANGING TRANSMISSION FLUID .
  7. Connect battery ground cable.
scientia non olet · About LEMON Manuals