Basic Inspection Procedure

Basic Inspection of Service Brake

BRAKE SPECIFICATION

Step	Action	Yes	No
1	Is the fluid level normal?	Go to Step 2	Replenish with fluid Go to Step 2
2	Does fluid leak?	Repair Go to Step 3	Go to Step 3
3	Is the booster functioning properly?	Go to Step 4	Repair Go to Step 4
4	Is the pad and rotor with specs?	Go to Step 5	Repair Go to Step 5
5	Reconnect all components. Ensure all component are properly mounted. Was this step finished?	Finished	Go to Step 5

Ground Inspection

GROUND INSPECTION

Step	Action	Yes	No
1	Is there good contact with the ABS ground points?	Go to Step 2	Repair Go to Step 2
2	Reconnect all components. Ensure that all components are properly mounted.	Finished	Go to Step 2