LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Axiom Base, 4WD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Crankshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Removal

  1. Disconnect battery ground cable
  2. Wiring connector from crankshaft position sensor.
  3. Remove crankshaft position sensor from cylinder block.
    Fig 1: Removing Crankshaft Position Sensor From Cylinder Block
    G02787953Courtesy of ISUZU MOTOR CO.
scientia non olet · About LEMON Manuals