Fuel Pressure Relief Procedure
CAUTION:
To reduce the risk of fire and personal injury, there are necessary to relieve the fuel system pressure before filler and gauge unit servicing The fuel system components.
CAUTION:
After relieving The system pressure, a small amount of fuel may be released when servicing fuel lines or connections. Reduce the chance of personal injury by covering The fuel line fittings with a shop towel before you disconnect the fittings. The towels will absorb any fuel that may leak out. When the disconnect is completed, place the towel in an approved container.
- Remove the fuel cap.
- Remove the fuel pump relay from the underhood relay box. Refer to Fuel Pump Relay .
- Start the engine and allow it to stall.
- Crank The engine for 30 seconds.
- Disconnect the negative battery cable.