Snapshot Display With TIS2000

Procedures for transferring and displaying Tech 2 snapshot data by using TIS2000 "Snapshot Upload" function is described below.

Snapshot data can be displayed with "Snapshot Upload" function included in TIS2000.

By analyzing these data in various methods, trouble conditions can be checked.

Snapshot data is displayed by executing the three steps below shown:

1. Record the snapshot data, in Tech 2.
2. Transfer the snapshot data to PC.

   After recording the snapshot in Tech 2, transfer the data from Tech 2 to PC by the below procedures.

   1. Start TIS2000.
   2. Select "Snapshot Upload" on the TIS2000 start screen.
   3. Select "Upload from trouble diagnosis tool (transfer from diagnosis tester)" or click the corresponding icon of the tool bar.
   4. Select Tech 2, and transfer the recorded snapshot information.
   5. Select the transferred snapshot.
   6. After ending transfer of the snapshot, data parameter list is displayed on the screen.
3. Snapshot data is displayed with TIS2000 "Snapshot Upload" function.

   Snapshot is stored in the PC hard disk or floppy disk, and can be displayed any time.

   Stored snapshot can be displayed by the below procedures.

   1. Start TIS2000.
   2. Select "Snapshot Upload" on the TIS2000 start screen.
   3. Select "Open the existing files" or click the corresponding icon of the tool bar.
   4. Select the transferred snapshot.
   5. Open the snapshot, to display the data parameter list on the screen.

1. Click the icon for graph display. "Graph Parameter" window opens.
2. Click the first graph icon of the window upper part, and select one parameter from the list of the window lower part. Selected parameter is displayed nest to the graph icon. Graph division can be selected in the field on the parameter right side.
3. Repeat the same procedures with the 2nd and 3rd icons.
4. After selecting all parameters to be displayed (Max. parameters), click "OK" button.
5. Parameter selected is displayed in graph form on the right of the data parameter on the screen.
6. Graph display can be moved with the navigation icon.
7. For displaying another parameter by graph, click the parameter of the list, drug the mouse to the display screen while pressing the mouse button and release the mouse button. New parameter is displayed at the position of the previous parameter. For displaying the graph display screen in full size, move the cursor upward on the screen. When the cursor is changed to the magnifying glass form, click the screen. Graph screen is displayed on the whole screen.

1. Click the 6 graph icon. "Graph Parameter" window opens.
2. Click the graph icon, select the parameter to be displayed from the list and change divisions according to necessity.
3. Repeat the same procedures with the graph icons, from the 2nd to 6th.
4. Click the "OK" button to display.
5. In this case, parameters are displayed only in graph form. All parameters are displayed in one graph.
6. The graph display screen can be moved with the navigation icon.