LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 1996 >> XJS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Ignition System >> Camshaft Position Sensor >> Removal (4.0L)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal (4.0L)

  1. Disconnect negative battery cable. Camshaft Position (CMP) sensor is located at right front of engine where distributor used to be located. See Figure . Rotate engine until No. 1 piston is at Top Dead Center (TDC).
  2. Verify that the imprinted circle in the metal wheel is centered in the CMP sensor window. See Figure . Mark CMP sensor housing-to-cylinder block location for installation reference. Disconnect CMP sensor connector. Remove CMP sensor retaining bolt. Remove CMP sensor.
scientia non olet · About LEMON Manuals