DTC P0111: IAT Range/Performance

NOTE: Limited information available from manufacturer.

NOTE: After each repair, clear DTCs. See CLEARING CODES/PCM RESET PROCEDURE under SELF-DIAGNOSTIC SYSTEM. Turn ignition off and then on. Read DTCs to verify repair is complete. For DLC and PCM connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagrams, see WIRING DIAGRAMS .

Possible causes:

IAT sensor disconnected.
Engine compartment hot air leak into intake system.
IAT sensor to PCM wiring open circuit or high resistance.
IAT sensor to PCM sensing circuit shorted to battery voltage.
IAT sensor failure.