DTC P0461: Fuel Sensor Signal Performance
NOTE:
Limited information available from manufacturer.
NOTE:
After each repair, clear DTCs. See CLEARING CODES/PCM RESET PROCEDURE
under SELF-DIAGNOSTIC SYSTEM. Turn ignition off and then on. Read DTCs to verify repair is complete. For DLC and PCM connector terminal identification, see CONNECTOR IDENTIFICATION
. For wiring diagrams, see WIRING DIAGRAMS
.
Possible causes:
- Instrument pack to PCM fuel level signal circuit open, shorted to ground or shorted to battery voltage.
- Instrument pack fault, incorrect fuel level signal.
- Fuel level sensor failure.