DTC Description
NOTE:
After each repair, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES/ECM RESET PROCEDURE under SELF-DIAGNOSTIC SYSTEM. Turn ignition off and then on. Read DTCs to verify repair is complete. For DLC and ECM connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagrams and all other terminal identification, see WIRING DIAGRAMS .
Mass Airflow (MAF) sensor ground malfunction. This DTC is an OBD-II fault. Check Engine Indicator is activated after 2 consecutive trips with fault present. Amber MIL (above message center) is illuminated after one trip with fault present. A message is displayed on message center.