DTC P0201-P0208: Fuel Injector Circuit Malfunction: Notes

NOTE: These DTCs will indicate which cylinder injector or circuit is faulty. Only in the event of multiple cylinder misfires will it be necessary to check more than one injector or circuit, in which case, multiple DTCs will be set.

NOTE: Bank 1 is located on right side of engine and may be referred to as Bank "A". Cylinders are identified (cylinder-bank) 1-1, 2-1, 3-1 and 4-1 (1-A, 2-A, 3-A and 4-A) from front to back on right side of engine. Bank 2 is located on left side of engine and may be referred to as Bank "B". Cylinders are identified (cylinder-bank) 1-2, 2-2, 3-2 and 4-2 (1-B, 2-B, 3-B and 4-B) from front to back on left side of engine.

NOTE: After each repair, clear DTCs. See CLEARING DIAGNOSTIC TROUBLE CODES/ECM RESET PROCEDURE under SELF-DIAGNOSTIC SYSTEM. Turn ignition off and then on. Read DTCs to verify repair is complete. For DLC and ECM connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagrams and all other terminal identification, see WIRING DIAGRAMS .