LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jaguar >> 2000 >> XJR >> Repair and Diagnosis >> External Pages >> Different car >> Section 161 (Module Communications Network) >> Module Communications Network >> Communications Network - Diagnostic Procedures >> Inspection and Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection and Verification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2008 Jaguar S-Type, 2007 Jaguar S-Type, 2006 Jaguar S-Type, 2005 Jaguar S-Type, and 2004 Jaguar S-Type. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern by operating the system.
  2. Visually inspect for obvious signs of mechanical, electrical or optical damage.
    Visual Inspection Chart

    Electrical
    • Fuse(s)
    • Wiring harness
    • Electrical connection(s)
    • Anti-lock brake (ABS), traction control (TC) and dynamic stability control (DSC) control module
    • Entertainment system audio unit
    • Compact disc changer
    • Amplifier
    • Climate control module
    • Instrument cluster (IC)
    • Front electronic module (FEM)
    • Engine control module (ECM)
    • Vehicle emergency monitor system (VEMS)
    • Restraints control module (RCM)
    • Voice activated control module (VACM)
    • Navigation control module (NC)
    • Driver door module (DDM)
    • Driver seat module (DSM)
    • Rear electronic module (REM)
    • Steering column lock module (SCLM)
    • Adaptive damping module
    • Electronic parking brake module
    • High intensity discharge headlamp module
    • Transmission selector lever
    • Transmission control module (TCM)
    • Parking aid module
    • Intrusion sensor module
    Visual Inspection Chart

    Optical
    • Routing of fibre optic harnesses
    • Correct engagement of optical connectors
    • Correct placement of optical connectors. (Ring order)
    • Damage to fibre. (chafing, abrasion, kinking, cuts, etc)
    • Correct assembly of optical connectors. (Backout, etc)
  3. If the concern remains after the inspection, connect the approved Jaguar diagnostic system to the data link connector (DLC) located beneath the instrument panel and select the vehicle to be tested from diagnostic system menu. If the diagnostic tester does not communicate with the vehicle:
    • check that the program card is properly installed.
    • check that the correct version of the program card is installed.
    • check the connections to the vehicle.
    • check the ignition switch position.
    • check the vehicle battery condition.
  4. If the concern is not visually evident, verify the symptom and refer to Symptom Chart .